Step 1: Start the reaction by pressing the packet containing the 2-part React-a-Pack epoxy between your fingers. Mix thoroughly for 30 seconds until the epoxy has a uniform appearance.
Step 2: Snip off one corner of the packet with scissors and apply to both surfaces to be bonded. Hold the pieces together with a clamp, tape, or weights.
Step 3: Allow a fixture time of 4-6 minutes. The item can be handled after 1 hour and will be completely cured after 24 hours. Note: for cooler temperatures, setting time may be longer.
Warning: Harmful if swallowed. Eye irritant. Contains epoxy and amine resins. Keep out of reach of children. |